Gage Chart
Standard Roll Configurations
|
Gage Designation
|
Approximate gage range
|
| |
|
Min
|
Max
|
| 1.3” x 21 rolls |
16 gage |
.010 |
.060 |
| 1.5” x 19 rolls |
12 gage |
.015 |
.100 |
| 1.75” x 19 rolls |
10 gage |
.022 |
.140 |
| 2.25” x 17 rolls |
3/16 inch |
.038 |
.190 |
| 3” x 15 rolls |
1/4 inch |
.065 |
.330 |
| 5” x 11 rolls |
1/2 inch |
.170 |
.520 |
The above gage chart is a general guideline. Actual gage capability
will vary depending on yield strength, application, drive system, material
width, etc.. If tension is applied the Min thickness will decrease.
Gage chart listed is for steel, Min thickness will increase
for aluminum.
return to top
|
